Effect of Roughness on Wetting of Solids

Simple item page
dc.contributor.advisorGates, Ian
dc.contributor.authorHuang, Xuemin
dc.contributor.committeememberHejazi, Hossein
dc.contributor.committeememberLu, Qingye
dc.date2021-06
dc.date.accessioned2021-05-03T17:51:58Z
dc.date.available2021-05-03T17:51:58Z
dc.date.issued2021-04-26
dc.description.abstractThe wetting of rough surfaces and the three-phase contact line are complex and vary according to the dimensions of the roughness and its spatial heterogeneity. The results documented in this thesis show that the apparent contact angle varies around the periphery of the water droplet due to the roughness of the surface on the first contact. Also, repeated wetting of the droplet on the surface reveals that the apparent contact angle changes due to residual liquid remaining on the rough surface. The wetting of water droplets is even more complex for curved rough surfaces. For these surfaces, at the three-phase contact line, the line tension contributes to the force balance. In this research, experiments reveal the effect of the roughness and curvature of a solid surface on the apparent contact angle as well as the line tension: the greater the roughness and the curvature of the solid, the larger is the line tension. Evaporation of sessile water droplets on solid surfaces has drawn much attention. Classic models do not describe evaporation near the three-phase contact line of rough surfaces. Here, we describe a new model for evaporation of sessile droplets on rough solid surfaces and compare the results to experimental results. The results suggest that the evaporation rate is larger on rougher surfaces. Electrokinetic phenomena which are founded on the physical mechanisms of streaming potential, zeta potential, electrical double layer (EDL) have an impact on rock wettability. If an electrolyte flows through porous rock, given the EDL and charge transport, potentially a current could occur in the system. In other words, given the existing salt concentration in reservoir water, there is potential that the moving liquid during production or water flooding or under natural flow could generate a current. Here, we report on experiments to explore the idea of the current generation from the flow of electrolytes through porous sandstone.en_US
dc.identifier.citationHuang, X. (2021). Effect of Roughness on Wetting of Solids (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/38804
dc.identifier.urihttp://hdl.handle.net/1880/113340
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectContact Angleen_US
dc.subjectSessile Droplet Evaporationen_US
dc.subjectLine Tensionen_US
dc.subjectElectrokineticsen_US
dc.subject.classificationEngineering--Chemicalen_US
dc.subject.classificationMaterials Scienceen_US
dc.subject.classificationEngineering--Petroleumen_US
dc.titleEffect of Roughness on Wetting of Solidsen_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Chemical & Petroleumen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ucalgary_2021_huang_xuemin.pdf
Size:
8.89 MB
Format:
Adobe Portable Document Format
Description:
Re-submitted Thesis
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations