Comparative Evaluation of Electrical Heating Methods for Oil Sand Reservoirs

Simple item page
dc.contributor.advisorChen, Zhangxing
dc.contributor.advisorDong, Mingzhe
dc.contributor.authorJi, Dongqi
dc.contributor.committeememberHuang, Haiping
dc.contributor.committeememberNasrabadi, Hadi
dc.contributor.committeememberHarding, Thomas Grant
dc.contributor.committeememberHejazi, Seyed Hossein
dc.date2019-11
dc.date.accessioned2019-09-13T15:20:26Z
dc.date.available2019-09-13T15:20:26Z
dc.date.issued2019-09-10
dc.description.abstractFor thermal heavy oil recovery, conventional steam injection processes are generally limited to reservoirs of relatively shallow depth, high permeability, thick pay zones and homogeneity. An alternative approach of applying electrical energy, including methods of electric heater, electrical resistance heating and electromagnetic heating, can be used to generate heat in reservoirs that are not suitable for steam injection or to improve the economics of the heavy oil recovery compared with steam injection processes. However, in the current, the most widely used simulation method of electrical heating is the data coupling of two simulators, one is used for calculation of electrical heating and the other is used for calculation of a oil reservoir. The work in this thesis provides a single simulator that is capable of modelling all electrical heating processes for heavy oil and oil sands thermal recovery and the computational overhead and complexity of swapping data back and forth between two simulators has been omitted. In this work, a new numerical simulator is developed that handles the three electrical heating processes, such as electric heater, electrical resistance heating and electromagnetic heating. New models regarding the physical processes of the electrical heating methods have been derived and used for numerical simulation. The electric current balance was used for the modelling of electrical current flow in oil sands reservoirs with an appropriate treatment of electrical conductivity between neighbouring grids. A Helmholtz equation for the magnetic field by deformation of Maxwell’s equations is presented that makes it feasible to find electromagnetic field solutions for an inhomogeneous medium, such as a oil reservoir. Also, it has not been possible until now to model all three electrical heating processes in a single model and the work in this thesis enables a direct comparison of the different methods to be made. The feasibility of electrical heating in oil sands reservoirs is examined in two case categories: a) a horizontal well containing a heating source and b) a horizontal well-pair with heating sources located in both wells. Simulation results are compared in temperature, water saturation and electrical energy dissipation in the three electrical heating processes.en_US
dc.identifier.citationLi, D. (2019). Comparative Evaluation of Electrical Heating Methods for Oil Sand Reservoirs (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/36988
dc.identifier.urihttp://hdl.handle.net/1880/110916
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectElectrical Heatingen_US
dc.subjectNumerical Simulationen_US
dc.subjectOil Sandsen_US
dc.subject.classificationEngineering--Petroleumen_US
dc.titleComparative Evaluation of Electrical Heating Methods for Oil Sand Reservoirsen_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Chemical & Petroleumen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ucalgary_2019_ji_dongqi.pdf
Size:
4.3 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations