Influence of Microarchitecture on the Mechanical Fatigue Behaviour of Equine Subchondral Bone

dc.contributor.advisorEdwards, William Brent
dc.contributor.authorKoshyk, Andrew
dc.contributor.committeememberManske, Sarah Lynn
dc.contributor.committeememberScott, W. Michael
dc.contributor.committeememberSparks, Holly Danielle
dc.contributor.committeememberLievers, William Brent
dc.date2023-11
dc.date.accessioned2023-09-15T17:56:39Z
dc.date.available2023-09-15T17:56:39Z
dc.date.issued2023-09-12
dc.description.abstractFractures of the equine metacarpophalangeal (MCP) joint are among the most common and fatal injuries experienced by racehorses. These bone injuries are a direct result of repetitive, high intensity loading of the skeleton during racing and training and there is consensus that they represent a mechanical fatigue phenomenon. Existing work has found the fatigue life of bone to be strongly determined by bone microarchitecture and the resulting stressed volume (i.e., the volume of bone stressed above yield). The purpose of this study was to quantify the influence of bone microarchitecture on the mechanical fatigue behaviour of equine subchondral bone from the MCP joint. Forty-eight subchondral bone samples were prepared from the third metacarpal (MC3) and proximal phalanx (P1) and subsequently imaged using high resolution micro-computed tomography (μCT) to quantify microarchitectural features of interest, including bone volume fraction, tissue mineral density, pore size, pore spacing, and pore number. Samples were cyclically loaded in compression to a stress of 70 MPa, and fatigue life was defined as the number of cycles until failure. Finite element models were created from the μCT images and used to quantify the stressed volume. Based on the expected log point-wise predictive density (ELPD), stressed volume was a strong predictor of fatigue life in both the MC3 and P1. Normalized stress (i.e., initial nominal strain) was also a strong predictor of fatigue life in samples from the MC3, but not for samples from the P1. This disparity can be attributed to differences in microstructure homogeneity. A regional analysis indicated fatigue life was more strongly associated with bone volume fraction in the superficial (r2 = 0.32, p < 0.001) and middle (r2 = 0.70, p < 0.001) regions of the subchondral bone, indicating that the cortical plate plays a more prominent role in the fatigue resistance of subchondral bone. By improving our understanding of the variance in fatigue life measurements, this research helps begin to clarify the underlying mechanisms of the mechanical fatigue process and provide a basic understanding of subchondral bone injuries in the equine fetlock joint.
dc.identifier.citationKoshyk, A. (2023). Influence of microarchitecture on the mechanical fatigue behaviour of equine subchondral bone (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.
dc.identifier.urihttps://hdl.handle.net/1880/117040
dc.identifier.urihttps://doi.org/10.11575/PRISM/41883
dc.language.isoen
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgary
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subject.classificationEngineering--Biomedical
dc.titleInfluence of Microarchitecture on the Mechanical Fatigue Behaviour of Equine Subchondral Bone
dc.typemaster thesis
thesis.degree.disciplineEngineering – Biomedical
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameMaster of Science (MSc)
ucalgary.thesis.accesssetbystudentI do not require a thesis withhold – my thesis will have open access and can be viewed and downloaded publicly as soon as possible.
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2023_koshyk_andrew.pdf
Size:
1.86 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description: