Multiple-scale wettability and imbibition in engineered and natural nanoporous media

Simple item page
dc.contributor.advisorClarkson, Christopher
dc.contributor.advisorBirss, Viola
dc.contributor.authorPan, Bin
dc.contributor.committeememberBryant, Steven
dc.contributor.committeememberMarriott, Robert
dc.contributor.committeememberShimizu, George
dc.contributor.committeememberKovscek, Anthony
dc.date2021-11
dc.date.accessioned2021-07-06T22:07:21Z
dc.date.available2021-07-06T22:07:21Z
dc.date.issued2021-06
dc.description.abstractWettability is an important parameter influencing imbibition into nanoporous media, and therefore, affects many processes in the fields of engineering and science. However, there are many challenges in quantifying wettability and imbibition in natural and heterogeneous nanoporous media. In order to provide fundamental understanding of wettability and imbibition in nanoporous media, in this dissertation, an engineered nanoporous carbon scaffold (NCS) with controllable wettability and pore geometry was used to investigate multi-scale wettability and imbibition (including spontaneous and electrocapillary) dynamics. The learnings obtained from studying this engineered material were subsequently applied to the evaluation of multi-scale wettability and spontaneous imbibition in unconventional hydrocarbon reservoirs. For spontaneous imbibition of nanoliter droplets in NCS and tight rocks, it was found that 1) spontaneous imbibition can take place in hydrophobic nanoporous media; 2) contact line remains pinned during the entire droplet lifetime; and 3) the estimated pore- contact angle (from new theoretical models) is larger than the measured macro- and micro- contact angles. For spontaneous imbibition of bulk liquid in NCS and shale/tight rocks, the following results were obtained: 1) a larger pore size leads to faster imbibition; 2) imbibition volume is linear with square root of time until front breakthrough; 3) a small amount of evaporation causes a deviation from this linear relationship; and 4) pore- contact angle is required for upscaling spontaneous imbibition data from laboratory to reservoir scales. Further, two theoretical models were developed to characterize these dynamics in the presence and absence of evaporation, respectively. Additionally, two new methods were developed to examine impacts of osmotic pressure and surfactant on fracturing fluid loss, respectively, which mitigated the effects of capillary pressure and rock heterogeneity. For electrocapillary imbibition of 1 M KCl electrolyte in hydrophobic NCS, two phenomena were observed: a dependence of electrocapillary imbibition on voltage polarity, and an appearance of electro-dewetting at negative voltages. Fundamentally, this dissertation advances the understanding of multi-scale wettability and imbibition physics in nanoporous media, and fracturing fluid loss mechanisms in unconventional reservoirs. Practically, this thesis provides useful guidance on fracturing fluid loss control and prediction in unconventional reservoirs, and on fluid manipulation at nanoscales.en_US
dc.identifier.citationPan, B. (2021). Multiple-scale wettability and imbibition in engineered and natural nanoporous media (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/38987
dc.identifier.urihttp://hdl.handle.net/1880/113598
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectMulti-scale wettabilityen_US
dc.subjectspontaneous imbibitionen_US
dc.subjectelectrocapillary imbibitionen_US
dc.subjectnanoporous mediaen_US
dc.subject.classificationHydrologyen_US
dc.subject.classificationPhysicsen_US
dc.subject.classificationEnergyen_US
dc.subject.classificationEngineeringen_US
dc.subject.classificationEngineering--Chemicalen_US
dc.subject.classificationEngineering--Petroleumen_US
dc.titleMultiple-scale wettability and imbibition in engineered and natural nanoporous mediaen_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Chemical & Petroleumen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 5 of 20
Thumbnail Image
Name:
ucalgary_2021_pan_bin.pdf
Size:
6.81 MB
Format:
Adobe Portable Document Format
Description:
Thesis
Download
No Thumbnail Available
Name:
ucalgary_2021_pan_bin_video3.1.avi
Size:
3.41 MB
Format:
Description:
Appendices A
Download
No Thumbnail Available
Name:
ucalgary_2021_pan_bin_video3.2.avi
Size:
5.38 MB
Format:
Description:
Appendices A
Download
No Thumbnail Available
Name:
ucalgary_2021_pan_bin_video3.3.avi
Size:
7.42 MB
Format:
Description:
Appendices A
Download
No Thumbnail Available
Name:
ucalgary_2021_pan_bin_video3.4.avi
Size:
8.72 MB
Format:
Description:
Appendices A
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations