Experimental and Numerical Studies of Foamy Oil Displacement Mechanisms in Heavy Oil Reservoirs

Simple item page
dc.contributor.advisorChen, Zhangxin
dc.contributor.authorWang, Danling
dc.contributor.committeememberMoore, Robert Gordon Gord
dc.contributor.committeememberChen, Shengnan
dc.date2019-06
dc.date.accessioned2019-04-29T18:56:54Z
dc.date.available2019-04-29T18:56:54Z
dc.date.issued2019-04-25
dc.description.abstractFoamy oil behavior has proven effective for heavy oil recovery and typically generates as pressure depletes in the first recovery stage. It possesses a low gas-oil ratio, maintains reservoir pressure and leads to high production recovery. Because the energy exhausts at the end of the first recovery stage, a significant amount of heavy oil remains underground. Therefore, the research objective is to develop a feasible gas injection process for foamy oil generation by understanding the generation mechanisms between gas and heavy oil. In the research, the mechanisms of foamy oil generation are experimentally investigated and the gas injection process is optimized. First, a vertical visible slab model is built, which can observe foamy oil generated in a gas flow channel. Gas injection tests are conducted afterwards. The strategy is optimized by identifying key parameters including gas injection type, gas injection rate, gas injection pressure and contact time. The model and our experiments reveal the mechanisms of foamy oil generation: the gas slowly reacts with the heavy oil at the contact surface and the generated foamy oil is stripped away with continuous gas injection. The highest oil recovery factor of 37.36% can be obtained by injecting gas at the rate of 2.0 ml/min, under 4.5 MPa, and using a contact time of 4 hours. The injected gas is mixed with 30% CH4 (methane) and 70% CO2 (carbon dioxide). Numerical simulation is also employed to validate the feasibility of the gas injection method for generating foamy oil and enhancing recovery in heavy oil reservoirs.en_US
dc.identifier.citationWang, D. (2019). Experimental and numerical studies of foamy oil displacement mechanisms in heavy oil reservoirs (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/36416
dc.identifier.urihttp://hdl.handle.net/1880/110234
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectFoamy Oilen_US
dc.subjectGas Floodingen_US
dc.subjectReservoir Simulationen_US
dc.subject.classificationEngineering--Petroleumen_US
dc.titleExperimental and Numerical Studies of Foamy Oil Displacement Mechanisms in Heavy Oil Reservoirsen_US
dc.typemaster thesisen_US
thesis.degree.disciplineEngineering – Chemical & Petroleumen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameMaster of Science (MSc)en_US
ucalgary.item.requestcopytrue
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ucalgary_2019_wang_danling.pdf
Size:
3.51 MB
Format:
Adobe Portable Document Format
Description:
Final version of thesis
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.74 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations